Table 8.1 - Final Guidelines: Miniature Golf 

15.5.1 General

Section:  Application
Requirement:  Newly designed and constructed and altered miniature golf courses must comply with 15.5.   

15.5.2 Accessible Holes

Section:  Scoping
Requirement:  At least 50% of holes must be accessible.  Accessible holes must be consecutive.

Section:  Exception - Consecutive Accessible Holes 
Requirement:  One break in sequence of consecutive accessible holes permitted, provided last hole on course is last
hole in sequence.   

15.5.3 Accessible Route

Section:  General
Requirement:  Accessible route must connect course entrance and start of play area of each accessible hole.  Course
must be configured to allow exit from last accessible hole to course entrance/exit without traveling back through
holes.

Section:  Exceptions - Accessible Route Located on Playing Surface
Requirement:  Where accessible route located on playing surface, carpet and handrail requirements do not apply; 1
inch maximum curb permitted for 32 inches minimum width to contain ball; 1:4 maximum slope permitted for 4 inch
maximum rise; landings required by 4.8.4 permitted to be 48 inches minimum in length; landings required by
4.8.4(3) permitted to be 48 inches by 60 inches minimum; and landing slopes permitted to be 1:20 maximum.

Section:  Accessible Route Adjacent to Playing Surface
Requirement:  Where accessible route located adjacent to playing surface, accessible route requirements apply.
     
15.5.4 Start of Play Areas

Section:  General
Requirement:  Start of play areas at accessible holes must be 48 inches by 60 inches minimum and have slopes not
steeper than 1:48.  

15.5.5 Golf Club Reach Range

Section:  General
Requirement:  All areas within accessible holes where golf balls rest must be within 36 inches maximum of
accessible route having maximum slope of 1:20 for 48 inch length.