Chapter 2: Scoping Requirements


V201 Application

 

V201.1 Scope.  All areas of newly designed and newly constructed passenger vessels and altered portions of existing passenger vessels shall comply with this document to the extent required by V201.1. 

 

Advisory V201.1 Scope.  The requirements are to be applied to all areas of a passenger vessel unless exempted, or where scoping limits the number of multiple elements required to be accessible.  For example, not all clustered single user toilet rooms are required to be accessible; those that are not required to be accessible are not required to comply with these requirements.

 

V201.1.1 Large Vessels.  Passenger vessels permitted to carry more than 150 passengers or more than 49 overnight passengers shall comply with Chapters 1 through 10.

 

Advisory V201.1.1 Large Vessels.  For US flag passenger vessels, the US Coast Guard (USCG) determines the number of passengers a vessel is permitted to carry.  This information is recorded in the vessel’s certificate of inspection (COI) which is required to be carried onboard the vessel.  Under USCG regulations, it is possible that a vessel could be capable of carrying more passengers then the COI allows.  However, the vessel owner may certificate a vessel to carry fewer than the maximum for business and regulatory reasons.

 

V201.1.2 Ferries.  Ferries shall comply with Chapters 1 through 10.

EXCEPTION:  Water taxis permitted to carry 150 or fewer passengers and that are not designated as ferries by the administrative authority shall not be required to comply with this document.

 

Advisory V201.1.2 Ferries.  This document applies to all new and altered ferries regardless of size or number of passengers permitted onboard. 

 

V201.1.3 Tenders.  Tenders carried by or used primarily by passenger vessels required to comply with V201.1.1 shall comply with Chapters 1 and 11.

EXCEPTION:  Tenders permitted to carry less than 60 passengers shall not be required to comply with this document.

 

Advisory V201.1.3 Tenders.  Tenders that are carried by or used primarily by large passenger vessels and that carry more than 150 passengers are only required to comply with chapters 1 and 11 and are not considered large vessels subject to V201.1.1. 

 

V201.2 Application Based on Facility Use.  Where a facility, room, or space on a passenger vessel contains more than one use, each portion shall comply with the applicable requirements for that use.

 

V201.3 Temporary and Permanent Structures.  These requirements shall apply to temporary and permanent facilities on passenger vessels.

 

Advisory V201.3 Temporary and Permanent Structures.  Temporary facilities covered by these requirements include, but are not limited to, reviewing stands, bleacher areas, stages, platforms and daises, fixed furniture systems, wall systems, and exhibit areas.

 

V201.4 Passenger Amenities.  At least one of each type of element, space, and facility required to comply with this document and used by passengers shall be on an entry deck or connected by an onboard accessible route to an entry deck.

 

Advisory V201.4 Passenger Amenities.  Types of elements, spaces, and facilities used by passengers include, but are not limited to, drinking fountains, seating, tables, counters, food service spaces, toilet rooms, and guest rooms.

 

In addition to the “one of each type” provision in V201.4, section V224.6 requires all passenger guest rooms that are required to comply with V806.2 to be located on the same deck(s) used to satisfy the “one of each type” requirement.  Also, sections V221.2.3.2 and V221.2.4 require all wheelchair spaces and companion seats to have a similar location.

 

 

V202 Existing Passenger Vessels

 

V202.1 General.  Additions and alterations to existing passenger vessels shall comply with V202.

 

V202.2 Additions.  Each addition to an existing passenger vessel shall comply with the requirements for new construction.  Each addition that affects or could affect the usability of or access to an area containing a primary function shall comply with V202.4.

 

V202.3 Alterations.  Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Chapter 2.

EXCEPTIONS:  1.  Unless required by V202.4, where elements or spaces are altered and the circulation path to the altered element or space is not altered, an onboard accessible route shall not be required.

2.  In alterations, where compliance with applicable requirements is technically infeasible, the alteration shall comply with the requirements to the maximum extent feasible.

3.  In alterations, each alteration shall provide accessibility to the maximum extent feasible where compliance with applicable provisions would result in:

(a) an increase in tonnage that changes the classification from 46 CFR subchapter K to 46 CFR subchapter H;

(b) a violation of the minimum requirements established by the administrative authority for the stability of the vessel;

(c) a reduction in the structural integrity or fire resistance of a Class A or B bulkhead or deck surface; or

(d) an increase in power load in excess of the existing power supply.

 

Advisory V202.3 Alterations.  Although covered entities are permitted to limit the scope of an alteration to individual elements, the alteration of multiple elements within a room or space may provide a cost-effective opportunity to make the entire room or space accessible.  Any elements or spaces of the passenger vessel or facility that are required to comply with these requirements must be made accessible within the scope of the alteration, to the maximum extent feasible.  If providing accessibility in compliance with these requirements for people with one type of disability (e.g., people who use wheelchairs) is not feasible, accessibility must still be provided in compliance with the requirements for people with other types of disabilities (e.g., people who have hearing impairments or who have vision impairments) to the extent that such accessibility is feasible.

 

V202.3.1 Prohibited Reduction in Access.  An alteration that decreases or has the effect of decreasing the accessibility of a passenger vessel below the requirements for new construction at the time of the alteration is prohibited.

 

V202.3.2 Extent of Application.  An alteration of an existing element, space, or area of a passenger vessel shall not impose a requirement for accessibility greater than required for new construction.

 

V202.4 Alterations Affecting Primary Function Areas.  In addition to the requirements of V202.3, an alteration that affects or could affect the usability of or access to an area containing a primary function shall be made so as to ensure that, to the maximum extent feasible, the path of travel to the altered area, including the rest rooms, telephones, and drinking fountains serving the altered area, are readily accessible to and usable by individuals with disabilities, unless such alterations are disproportionate to the overall alterations in terms of cost and scope as determined under criteria established by the Attorney General.

 

V202.5 Alterations to Qualified Historic Passenger Vessels.  Alterations to a qualified historic passenger vessel shall comply with V202.3 and V202.4.

EXCEPTION:  Where the State Historic Preservation Officer or Advisory Council on Historic Preservation determines that compliance with the requirements for onboard accessible routes or toilet facilities would threaten or destroy the historic significance of the passenger vessel, the exceptions for alterations to qualified historic passenger vessels for that element shall be permitted to apply.

 

 

V203 General Exceptions

 

V203.1 General.  Passenger vessels shall be exempt from these requirements to the extent specified by V203.

 

V203.2 Employee Areas.  Areas of passenger vessels which are exclusively used by employees shall not be required to comply with this document.

 

Advisory V203.2 Employee Areas.  Where an accessible means of escape required by V207 runs through an employee space, only the circulation path in the space containing the accessible means of escape is subject to applicable accessibility requirements because the circulation path is not exclusively used by employees.

 

V203.3 Limited Access Spaces.  Spaces accessed only by ladders, catwalks, crawl spaces, manholes, hatches, or very narrow passageways shall not be required to comply with this document.

 

V203.4 Camber and Sheer.  Where necessary to meet camber and sheer needs of the vessel, running slopes and cross slopes shall comply with this document to the maximum extent feasible.

 

V203.5 Water Slides.  Water slides shall not be required to comply with this document.

 

V203.6 Raised Diving Boards and Diving Platforms.  Raised diving boards and diving platforms shall not be required to comply with this document.

 

 

V204 Protruding Objects

 

V204.1 General.  Protruding objects on circulation paths shall comply with V307.

EXCEPTIONS:  1.  Within areas of sport activity, protruding objects on circulation paths shall not be required to comply with V307.

2.  Within play areas, protruding objects on circulation paths shall not be required to comply with V307 provided that ground level accessible routes provide vertical clearance in compliance with V1004.2.

 

 

V205 Operable Parts

 

V205.1 General.  Operable parts on elements required to comply with this document,on onboard accessible routes, and in rooms or spaces required to comply with this document shall comply with V309.

EXCEPTIONS:  1.  Operable parts that are intended for use only by employees shall not be required to comply with V309.

2.  Electrical or communication receptacles serving a dedicated use shall not be required to comply with V309.

3.  Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with V309.

4.  Deck surface electrical receptacles shall not be required to comply with V309.

5.  HVAC diffusers shall not be required to comply with V309.

6.  Except for light switches, where redundant controls are provided for a single element, one control in each space shall not be required to comply with V309.

7.  Exercise machines shall not be required to comply with V309.

 

Advisory V205.1 General.  Controls covered by V205.1 include, but are not limited to, light switches, circuit breakers, duplexes and other convenience receptacles, environmental and appliance controls, plumbing fixture controls, and security and intercom systems.

 

 

V206 Onboard Accessible Routes

 

V206.1 General.  Onboard accessible routes shall be provided in accordance with V206 and shall comply with Chapter 4.

 

V206.2 Where Required.  Onboard accessible routes shall be provided where required by V206.2.

 

V206.2.1 Multi-Deck Passenger Vessels.  At least one onboard accessible route shall connect each passenger deck and mezzanine in multi-deck passenger vessels.  Where passenger vessels have multiple entry decks, at least one onboard accessible route shall connect each entry deck.

EXCEPTIONS:  1.  Passenger vessels that have only two passenger decks shall not be required to provide an onboard accessible route to connect the decks unless both decks are entry decks.

2.  Where each passenger deck is less than 3000 square feet (279 m2), the passenger vessel shall not be required to provide an onboard accessible route connecting passenger decks that are not entry decks.

3.  Decks, other than entry decks, that have less than 300 (28 m2) square feet per deck shall not be required to be connected to an onboard accessible route.

4.  Where vehicle lanes for trucks, buses or other high clearance vehicles divide a higher deck, other than entry decks, into two separate segments and no horizontal circulation is provided between these two segments, only one segment of the divided deck is required to be connected by an onboard accessible route.

5.  Decks below the bulkhead deck are not required to be connected to an onboard accessible route. 

6.  Where exceptions for alterations to qualified historic passenger vessels are permitted by V202.5, an onboard accessible route shall not be required between decks.

 

Advisory V206.2.1 Multi-Deck Passenger VesselsDeck is a defined term in this document (see V106.5).  Under section V206.2.1, all passenger decks and mezzanines must be connected to an onboard accessible route in multi-deck vessels, unless an exception applies.  Where an exception applies and a deck is not required to be connected to an elevator or other means of vertical access, the mezzanine on that deck is also not required to be connected to a means of vertical access.  However, the exceptions do not exempt the elements and spaces located within such decks and mezzanines from compliance with this document.  For example, a drinking fountain on a passenger deck not connected by an elevator or other means of vertical access must still comply with V211 (and V206.2.2).

 

V206.2.1.1 Stairs and Escalators in Existing Passenger Vessels.  In alterations and additions, where an escalator or stair is provided where none existed previously and major structural modifications are necessary for the installation, at least one onboard accessible route shall be provided between the levels served by the escalator or stair unless exempted by V206.2.1 Exceptions 1 through 6.

 

V206.2.2 Spaces and Elements.  Within a deck, at least one onboard accessible route shall connect all spaces and elements within the passenger vessel required to comply with this document which are otherwise connected by a circulation path, unless exempted by V206.2.1 Exceptions 1 through 6. 

 

EXCEPTIONS:  1.  In assembly areas with fixed seating required to comply with V221, an onboard accessible route shall not be required to serve fixed seating where wheelchair spaces required to be on an onboard accessible route are not provided.

2.  Onboard accessible routes shall not be required to connect mezzanines where passenger vessels have no more than one passenger deck.  In addition, onboard accessible routes shall not be required to connect decks or mezzanines where multi-deck passenger vessels are exempted by V206.2.1 Exceptions 1 through 6.

 

Advisory V206.2.2 Spaces and Elements.  Accessible routes must connect all spaces and elements required to be accessible including changes in level (e.g., tender platforms, raised dinning areas, and speaker platforms) within the deck.  Where an elevator or other means of vertical access is not required by V206.2.1 to a passenger deck, the requirements of V206.2.2 still apply within that deck.

 

V206.2.3 Restaurants and Cafeterias.  In restaurants and cafeterias, at least one onboard accessible route shall be provided to all dining areas, including raised or sunken dining areas, and outdoor dining areas.

EXCEPTIONS:  1.  In passenger vessels not required to provide an onboard accessible route between decks, an onboard accessible route shall not be required to a mezzanine dining area where the mezzanine contains less than 25 percent of the total combined area for seating and dining and where the same decor and services are provided in the accessible area.

2.  In alterations, an onboard accessible route shall not be required to existing raised or sunken dining areas, or to all parts of existing outdoor dining areas where the same services and decor are provided in a space required to comply with this document and not restricted to use by people with disabilities.

 

Advisory V206.2.3 Restaurants and Cafeterias Exception 2.  Examples of “same services” include, but are not limited to, bar service, rooms having smoking and non-smoking sections, lotto and other table games, carry-out, and buffet service.  Examples of “same decor” include, but are not limited to, seating at or near windows and railings with views, areas designed with a certain theme, party and banquet rooms, and rooms where entertainment is provided.

 

V206.2.4 Performance Areas.  Where a circulation path directly connects a performance area to an assembly seating area, at least one onboard accessible route shall directly connect the assembly seating area with the performance area.

 

V206.2.5 Bowling Lanes.  Where bowling lanes are provided, at least 5 percent, but no fewer than one of each type of bowling lane, shall be on an onboard accessible route.

 

V206.2.6 Court Sports.  In court sports, at least one onboard accessible route shall directly connect both sides of the court.

 

V206.2.7 Exercise Machines and Equipment.  Exercise machines and equipment required to comply with V230 shall be on an onboard accessible route.

 

V206.2.8 Miniature Golf Facilities.  Holes required to comply with V231.2, including the start of play, shall be on an onboard accessible route.  Accessible routes serving miniature golf facilities shall comply with Chapter 4 except as modified by V1003.2.

 

V206.2.9 Play Areas.  Play areas shall provide onboard accessible routes in accordance with V206.2.9.  Accessible routes serving play areas shall comply with Chapter 4 except as modified by V1004.2.

 

V206.2.9.1 Ground Level and Elevated Play Components.  At least one onboard accessible route shall be provided within the play area.  The onboard accessible route shall connect ground level play components required to comply with V232.2.1 and elevated play components required to comply with V232.2.2, including entry and exit points of the play components.

 

V206.2.9.2 Soft Contained Play Structures.  Where three or fewer entry points are provided for soft contained play structures, at least one entry point shall be on an onboard accessible route.  Where four or more entry points are provided for soft contained play structures, at least two entry points shall be on an onboard accessible route.

 

V206.3 Location.  Onboard accessible routes shall coincide with or be located in the same area as general circulation paths.  Where circulation paths are interior, required onboard accessible routes shall also be interior.  An onboard accessible route connecting any two spaces required to comply with this document shall not be more than 300 feet (91 m) longer than the shortest general circulation path connecting the same two spaces.

 

V206.4 Entry and Departure Points.  Each entry and departure point used by passengers shall be on an onboard accessible route.

EXCEPTION:  Only one tender boarding platform on the port and starboard side of the vessel is required to be on an onboard accessible route.

 

V206.5 Doors, Doorways, and Gates.  Doors, doorways, and gates providing user passage shall be provided in accordance with V206.5.

 

V206.5.1 Deck Entry and Departure.  Where doors, doorways, or gates are provided at entry and departure points required to comply with V206.4, at least one door, doorway, or gate shall comply with V404.

 

V206.5.2 Rooms and Spaces.  Within a passenger vessel, at least one door, doorway, or gate serving each room or space complying with these requirements shall comply with V404.

 

V206.6 Elevators.  Elevators provided for passengers shall comply with V407.  Where multiple elevators are provided, each elevator shall comply with V407.

EXCEPTIONS:  1.  In a passenger vessel permitted to use the exceptions to V206.2.1 or permitted by V206.7 to use a platform lift, elevators complying with V408 shall be permitted.

2.  In passenger vessels less than 10,000 ITC tons, elevators complying with V408 shall be permitted.

 

Advisory V206.6 Elevators Exception 2.  The International Convention on Tonnage Measurement of Ships, 1969 (ITC) is a treaty to which the United States is a party.  “Tonnage" is a commonly-used measurement of a ship's size and is used for various international and domestic purposes (e.g., determining taxes, pilotage and port fees, manning, licensing and training of officers and crew, and shipboard equipment).  These guidelines use the measurement system established by the ITC for determining where limited-use-limited-application elevators are permitted to be used when providing vertical access.

 

V206.6.1 Existing Elevators.  Where elements of existing elevators are altered, the same element shall also be altered in all elevators that are programmed to respond to the same hall call control as the altered elevator and shall comply with the requirements of V407 or V408 for the altered element.

 

V206.7 Platform Lifts.  Platform lifts shall comply with V409.  Platform lifts shall be permitted as a component of an onboard accessible route in new construction in accordance with V206.7. 

EXCEPTION:  In alterations, platform lifts shall be permitted as a component of any onboard accessible route.

 

V206.7.1 Performance Areas and Speakers’ Platforms.  Platform lifts shall be permitted to provide onboard accessible routes to performance areas and speakers’ platforms.

 

V206.7.2 Wheelchair Spaces.  Platform lifts shall be permitted to provide an onboard accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of V221 and V802.

 

V206.7.3 Vertical Clearance Constraints.  Platform lifts shall be permitted where vertical clearance constraints on a route a passenger vessel operates makes the use of an elevator infeasible.

 

V206.7.4 Passenger Guest Rooms.  Platform lifts shall be permitted to connect levels within guest rooms required to provide mobility features complying with V806.2.

 

V206.7.5 Decks Less Than 3000 Square Feet.  Platform lifts shall be permitted to provide an onboard accessible route to decks which are less than 3000 square feet (279 m2).

 

V206.7.6 Play Areas.  Platform lifts shall be permitted to provide onboard accessible routes to play components or soft contained play structures.

 

V206.7.7 Tender Platforms.  Platform lifts shall be permitted to provide an onboard accessible route to tender boarding platforms.

EXCEPTION:  Where platform lifts serving tender boarding platforms are exposed to waves and the tender boarding platforms are less than 300 square feet (28 m2), manually powered boarding lifts complying with V414 shall be permitted.

 

V206.8 Security Barriers.  Security barriers, including but not limited to, security bollards and security check points shall not obstruct a required onboard accessible route or accessible means of escape.

EXCEPTION:  Where security barriers incorporate elements that cannot comply with these requirements such as certain metal detectors, fluoroscopes, or other similar devices, the onboard accessible route shall be permitted to be located adjacent to security screening devices.  The onboard accessible route shall permit persons with disabilities passing around security barriers to maintain visual contact with their personal items to the same extent provided others passing through the security barrier.

 

 

V207 Accessible Means of Escape

 

V207.1 General.  Accessible means of escape shall be provided in accordance with V207.  Each accessible means of escape shall be a continuous path of escape travel complying with V410 to an evacuation station.

EXCEPTION:  In alterations, accessible means of escape shall not berequired.

 

V207.2 Number Required.  Where one means of escape is required by the administrative authority from a space required to comply with this document, the space shall be served by at least one accessible means of escape.  Where more than one means of escape is required by the administrative authority from a space required to comply with this document, the space shall be served by at least two accessible means of escape. 

EXCEPTIONS:  1.  Where a required means of escape is permitted by the administrative authority to include a ladder, window, or deck scuttle, the corresponding accessible means of escape shall not be required.

2.  Where requiredmeans of escape are permitted by the administrative authority to share a common path of escape travel, the corresponding accessible means of escape shall be permitted to share a common path of escape travel.

 

Advisory V207.2 Required Number.  For US flag passenger vessels, the US Coast Guard (USCG) is the administrative authority for determining the number of means of escape which are required from a space.  For each space required to comply with this document, the USCG number (for the applicable space) is used to determine the number of accessible means of escape complying with V410 which must be provided.

 

V207.3 Elevators.  Where an accessible means of escape from any passenger deck travels vertically four or more decks, at least one accessible means of escape from each passenger deck shall contain an elevator complying with V206.6 and V410.3. 

EXCEPTIONS:  1.  Where vessels are protected by an automatic sprinkler system complying with NFPA 13 (incorporated by reference, see V105.2.4) or an international convention that applies to passenger vessels that the United States is a party to, the elevator is not required to connect decks that:  (1) are located above the highest deck containing evacuation stations, and (2) have at least two main vertical zones complying with requirements established by the administrative authority.

2.  Where vessels are protected by an automatic sprinkler system complying with NFPA 13 (incorporated by reference, see V105.2.4) or an international convention that applies to passenger vessels that the United States is a party to, the elevator shall not be required to those decks connected by a ramp complying with V405.

3.  Where vertical access is not required by an exception under V206.2.1, an elevator shall not be required.

 

Advisory V207.3 Elevators.  The elevator required by this section is intended to be crew operated in an emergency.  The Marine Safety Committee Circular 846 of the International Maritime Organization provides that in emergencies, lifts (elevators) may be used as an additional means of escape provided that they are controlled by the assigned member of the crew and are supplied from the ships emergency source of power.  Elevators required by V206.2.1 may also be used to comply with this section provided the elevators also comply with V410.3.

 

Advisory V207.3 Elevators Exceptions 1 and 2.  The automatic sprinkler system requirements in the International Convention for the Safety of Life at Sea (SOLAS) would satisfy the conditions of exceptions 1 and 2.  Information on SOLAS may be obtained from the International Maritime Organization, 4 Albert Embarkment, London SE1 7SR United Kingdom (http://www.imo.org).

 

 

V208 Passenger Vessel Boarding. 

 

V208.1 General.  Where passenger vessels are embarking or disembarking passengers from fixed piers, floating piers, or landside structures, at least one passenger boarding system complying with V412 shall connect an entry deck to fixed piers, floating piers, or landside structures.

EXCEPTION:  Where a boarding system complying with V412 is provided on a floating pier, fixed pier, or landside structure, a vessel carried boarding system is not required.

 

 

V209 Stairways

 

V209.1 General.  Interior and exterior stairs connecting levels not connected by an onboard accessible route shall comply with V502.

EXCEPTIONS:  1.  In assembly areas, aisle stairs shall not be required to comply with V502.

2.  Stairs that connect play components shall not be required to comply with V502.

 

 

V210 Rinsing Showers

 

V210.1 General.  Where provided, rinsing showers shall comply with V608.

EXCEPTION:  Where rinsing showers are clustered at a single location, at least one shall comply with V608.

 

 

V211 Drinking Fountains

 

V211.1 General.  Where provided on a deck, drinking fountains shall be provided in accordance with V211.

 

V211.2 Minimum Number.  No fewer than two drinking fountains shall be provided.  One drinking fountain shall comply with V602.1 through V602.6 and one drinking fountain shall comply with V602.7.

EXCEPTION:  Where a single drinking fountain complies with V602.1 through V602.6 and V602.7 it shall be permitted to be substituted for two separate drinking fountains. 

 

V211.3 More Than Minimum Number.  Where more than the minimum number of drinking fountains specified in V211.2 is provided, 50 percent of the total number of drinking fountains provided shall comply with V602.1 through V602.6 and 50 percent of the total number of drinking fountains provided shall comply with V602.7.

EXCEPTION:  Where 50 percent of the drinking fountains yields a fraction, 50 percent shall be permitted to be rounded up or down provided that the total number of drinking fountains complying with V211 equals 100 percent of drinking fountains.

 

 

V212 Kitchens, Kitchenettes, and Sinks

 

V212.1 General.  Where provided, kitchens, kitchenettes, and sinks shall comply with V212.1.

 

V212.2 Kitchens and Kitchenettes.  Kitchens and kitchenettes shall comply with V804.

 

V212.3 Sinks.  Where sinks are provided, at least 5 percent, but no fewer than one, of each type provided in each room or space required to comply with this document shall comply with V606.

EXCEPTION:  Mop or service sinks shall not be required to comply with V212.3.

 

 

V213 Toilet Facilities and Bathing Facilities

 

V213.1 General.  Where toilet facilities and bathing facilities are provided, they shall comply with V213.

 

V213.2 Toilet Rooms and Bathing Rooms.  Where toilet rooms are provided, each toilet room shall comply with V603.  Where bathing rooms are provided, each bathing room shall comply with V603.

EXCEPTIONS:  1.  In alterations, where it is technically infeasible to comply with V603, the existing toilet rooms or bathing rooms shall comply to the maximum extent feasible in accordance with V202.3 exception 2, or provide a single unisex toilet room or bathing room complying with V213.2.1 that is located in the same area and on the same deck as existing inaccessible toilet or bathing rooms.

2.  Where exceptions for alterations to qualified historic passenger vessels are permitted by V202.5, no fewer than one toilet room for each sex complying with V603 or one unisex toilet room complying with V213.2.1 shall be provided.

3.  Where multiple single user portable toilet or bathing units are clustered at a single location, no more than 5 percent of the toilet units and bathing units at each cluster shall be required to comply with V603.  Portable toilet units and bathing units complying with V603 shall be identified by the International Symbol of Accessibility complying with V703.7.2.1.

4.  Where multiple single user toilet rooms are clustered at a single location, no more than 50 percent of the single user toilet rooms for each use at each cluster shall be required to comply with V603.

 

Advisory V213.2 Toilet Rooms and Bathing Rooms.  These requirements allow the use of unisex (or single-user) toilet rooms in alterations when technical infeasibility can be demonstrated.  Unisex toilet rooms benefit people who use opposite sex personal care assistants.  For this reason, it is advantageous to install unisex toilet rooms in addition to accessible single-sex toilet rooms in new facilities.

 

Advisory V213.2 Toilet Rooms and Bathing Rooms Exceptions 3 and 4.  A “cluster” is a group of toilet rooms proximate to one another.  Generally, toilet rooms in a cluster are within sight of, or adjacent to, one another.

 

V213.2.1 Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms.  Unisex toilet rooms shall contain one lavatory and either one water closet or one water closet and one urinal.  Unisex bathing rooms shall contain one lavatory, one water closet and either one shower or one shower and one bathtub.  Doors to unisex toilet rooms and unisex bathing rooms shall have privacy latches.

 

V213.3 Plumbing Fixtures and Accessories.  Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with V213.2 shall comply with V213.3.

 

V213.3.1 Toilet Compartments (Stalls).  Where toilet compartments are provided, at least one toilet compartment shall comply with V604.8.1.  In addition to the compartment required to comply with V604.8.1, at least one compartment shall comply with V604.8.2 where six or more toilet compartments are provided, or where the combination of urinals and water closets totals six or more fixtures.

 

Advisory V213.3.1 Toilet Compartments.  A toilet compartment is a partitioned space that is located within a toilet room, and that normally contains no more than one water closet.  A toilet compartment may also contain a lavatory.  A lavatory is a sink provided for hand washing.  Full-height partitions and door assemblies can comprise toilet compartments where the minimum required spaces are provided within the compartment.

 

V213.3.2 Water Closets.  Where water closets are provided, at least one shall comply with V604.

 

V213.3.3 Urinals.  Where more than one urinal is provided, at least one shall comply with V605.

 

V213.3.4 Lavatories.  Where lavatories are provided, at least one shall comply with V606 and shall not be located in a toilet compartment.

 

V213.3.5 Mirrors.  Where mirrors are provided, at least one shall comply with V603.3.

 

V213.3.6 Bathing Facilities.  Where bathtubs or showers are provided, at least one bathtub complying with V607 or at least one shower complying with V608 shall be provided.

 

V213.3.7 Coat Hooks and Shelves.  Where coat hooks or shelves are provided in toilet rooms without toilet compartments, at least one of each type shall comply with V603.4.  Where coat hooks or shelves are provided in toilet compartments, at least one of each type complying with V604.8.3 shall be provided in toilet compartments required to comply with V213.3.1.  Where coat hooks or shelves are provided in bathing facilities, at least one of each type complying with V603.4 shall serve fixtures required to comply with V213.3.6.

 

 

V214 Washing Machines and Clothes Dryers

 

V214.1 General.  Where provided, washing machines and clothes dryers shall comply with V214.

 

V214.2 Washing Machines.  Where three or fewer washing machines are provided, at least one shall comply with V611.  Where more than three washing machines are provided, at least two shall comply with V611.

 

V214.3 Clothes Dryers.  Where three or fewer clothes dryers are provided, at least one shall comply with V611.  Where more than three clothes dryers are provided, at least two shall comply with V611.

 

 

V215 Emergency Alarm Systems

 

V215.1 General.  Where emergency alarm systems are provided to alert passengers, alarms shall comply with V215.

EXCEPTION:  In alterations, compliance with V215 shall not be required except where an existing alarm system is upgraded or replaced, or a new alarm system is installed.

 

V215.2 Public Areas.  Alarms in public areas shall comply with principles of best practice.

 

V215.3 Guest Rooms.  Guest rooms required to comply with V224.4 shall provide alarms complying with principles of best practice.

 

 

V216 Signs

 

V216.1 General.  Signs shall be provided in accordance with V216 and shall comply with V703.

EXCEPTIONS:  1.  Vessel directories, menus, seat and row designations in assembly areas, occupant names, vessel names, and company names and logos shall not be required to comply with V216.

2.  In parking facilities, signs shall not be required to comply with V216.2, V216.3, and V216.6 through V216.9.

3.  Temporary, 7 days or less, signs shall not be required to comply with V216.

 

V216.2 Designations.  Interior and exterior signs identifying permanent rooms and spaces shall comply with V703.1, V703.2, and V703.5.  Where pictograms are provided as designations of permanent interior rooms and spaces, the pictograms shall comply with V703.6 and shall have text descriptors complying with V703.2 and V703.5.

EXCEPTION:  Exterior signs that are not located at the door to the space they serve shall not be required to comply with V703.2.

 

Advisory V216.2 Designations.  Section V216.2 applies to signs that provide designations, labels, or names for rooms or spaces where the sign is not likely to change over time.  Examples include signs labeling restrooms, room and deck numbers or letters, and room names.  Tactile text descriptors are required for pictograms that are provided to label or identify a permanent room or space.  Pictograms that provide information about a room or space, such as “no smoking,” occupant logos, and the International Symbol of Accessibility, are not required to have text descriptors.

 

V216.3 Directional and Informational Signs.  Signs that provide direction to or information about spaces and facilities of the passenger vessel shall comply with V703.5.

 

Advisory V216.3 Directional and Informational Signs.  Information about interior spaces and facilities includes rules of conduct, occupant load, and similar signs.  Signs providing direction to rooms or spaces include those that identify escape routes.

 

V216.4 Means of Escape.  Signs for means of escape shall comply with V216.4.

 

V216.4.1 Exit Doors.  Exit doors identified with illuminated exit signs shall be identified by tactile signs complying with V703.1, V703.2, and V703.5.

 

V216.4.2 Areas of Temporary Refuge.  Areas of temporary refuge shall comply with V216.4.2.

 

V216.4.2.1 Identification.  Each door providing access to an area of temporary refuge from an adjacent deck area shall be identified by a sign complying with V703.5, stating “AREA OF TEMPORARY REFUGE”, and the sign shall include the International Symbol of Accessibility complying with V703.7.2.1.  Where exit sign illumination is required by the administrative authority, the area of temporary refuge sign shall be illuminated.  Additionally, a tactile sign complying with V703.2 shall be located at each door to an area of temporary refuge.

 

V216.4.2.2 Instructions.  In each area of temporary refuge provided with a two-way communication system, instructional signage on the use of the area under emergency conditions shall be posted under the communications system and shall comply with V703.5.  The instructions shall include all of the following:

 

1.  Directions to other accessible means of escape;

2.  Directions that persons able to use the stairways do so as soon as possible unless they are assisting others;

3.  Information on planned availability of assistance in the use of stairs or supervised operation of elevators and how to summon such assistance; and

4.  Directions for use of emergency communications system.

 

V216.4.3 Directional Signs.  At exit doors and elevators serving a space required to comply with this document but not serving as an accessible means of escape, signage complying with V703.5 shall be provided indicating the location of the nearest accessible means of escape.

 

V216.5 Exterior Doors.  Where not all exterior public doors comply with V404, public doors complying with V404 shall be identified by the International Symbol of Accessibility complying with V703.7.2.1.  Directional signs complying with V703.5 that indicate the location of the nearest public door complying with V404 shall be provided at exterior public doors that do not comply with V404.

 

V216.6 Elevators.  In alterations, where existing elevators do not comply with V407, elevators complying with V407 shall be clearly identified with the International Symbol of Accessibility complying with V703.7.2.1.

 

V216.7 Toilet Rooms and Bathing Rooms.  Signs for toilet rooms and bathing rooms shall be provided in accordance with V216.7

 

V216.7.1 Alterations.  In alterations, where existing toilet rooms or bathing rooms do not comply with V603, directional signs complying with V703.5 shall be provided to indicate the location of the nearest toilet room or bathing room complying with V603 within the facility.  In addition, the toilet rooms or bathing rooms complying with V603 shall be identified by the International Symbol of Accessibility complying with V703.7.2.1.  Directional signs shall include the International Symbol of Accessibility complying with V703.7.2.1.

 

V216.7.2  Clustered Single User Toilet Facilities or Bathing Facilities.  Where clustered single user toilet facilities or bathing facilities are permitted to use V213.2 Exceptions 3 or 4, toilet facilities or bathing facilities complying with V603 shall be identified by the International Symbol of Accessibility complying with V703.7.2.1 unless all toilet facilities and bathing facilities comply with V603.

 

V216.8 Assistive Listening Systems.  Each assembly area and public seating area required by V219 to provide assistive listening systems shall provide signs informing patrons of the availability of the assistive listening system.  Assistive listening signs shall comply with V703.5 and shall include the International Symbol of Access for Hearing Loss complying with V703.7.2.2.

 

V216.9 Check-Out Aisles.  Where more than one check-out aisle is provided, check-out aisles complying with V904.3 shall be identified by the International Symbol of Accessibility complying with V703.7.2.1.  Where check-out aisles are identified by numbers, letters, or functions, signs identifying check-out aisles complying with V904.3 shall be located in the same location as the check-out aisle identification.

EXCEPTION:  Where all check-out aisles serving a single function comply with V904.3, signs complying with V703.7.2.1 shall not be required.

 

 

V217 Telephones

 

V217.1 General.  Where coin-operated pay telephones, coinless pay telephones, closed-circuit telephones, courtesy telephones, or other types of public telephones are provided, public telephones shall be provided in accordance with V217 for each type of public telephone provided. 

 

Advisory V217.1 General.  These requirements apply to all types of public telephones, including courtesy phones provided at passenger vessel restaurants or concierge desks that provide free direct connections to passenger guest rooms or guest services.

 

V217.2 Minimum Number.  No fewer than two public telephones shall be provided at each location containing telephones.  At least one shall be a wheelchair accessible public telephone complying with V704.2 and at least one shall be a public TTY complying with V704.4.

 

V217.3 Volume Controls.  All public telephones shall have volume controls complying with V704.3.

 

 

V218 Two-Way Communication Systems

 

V218.1 General.  Where a two-way communication system is provided to gain admittance to a passenger vessel or to restricted areas open to passengers within a passenger vessel, the system shall comply with V705.

 

 

V219 Assistive Listening Systems

 

V219.1 General.  Assistive listening systems shall be provided in accordance with V219 and shall comply with V706.

 

V219.2 Required Systems.  In each assembly area and public seating area where audible communication is integral to the use of the space, an assistive listening system shall be provided.

EXCEPTION:  Assistive listening systems shall not be required where audio amplification is not provided.

 

V219.3 Receivers.  Receivers complying with V706.3 shall be provided for assistive listening systems in assembly areas and public seating areas in accordance with Table V219.3 and calculated according to the total number of seats in the vessel required to comply with V219.2.  Twenty-five percent minimum of receivers provided, but no fewer than two, shall be hearing-aid compatible in accordance with V706.4.

EXCEPTION:  Where all seats in an assembly area or public seating area are served by an induction loop assistive listening system, the minimum number of receivers required by Table V219.3 to be hearing-aid compatible shall not be required to be provided.

 

Table V219.3 Receivers for Assistive Listening Systems

Capacity of Seating

Minimum Number

of Required Receivers

Minimum Number of

Required Receivers

Required to be Hearing-Aid Compatible

50 or less

2

2

51 to 200

2, plus 1 per 25 seats

over 50 seats1

2

201 to 500

2, plus 1 per 25 seats

over 50 seats1

1 per 4 receivers1

501 to 1000

20, plus 1 per 33 seats

over 500 seats1

1 per 4 receivers1

1001 to 2000

35, plus 1 per 50 seats

over 1000 seats1

1 per 4 recievers1

2001 and over

55, plus 1 per 100 seats

over 2000 seats1

1 per 4 receivers1

1.  or fraction thereof

 

 

V220 Automatic Teller Machines and Fare Machines

 

V220.1 General.  Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with V707.  Where bins are provided for envelopes, waste paper, or other purposes, at least one of each type shall comply with V807.

 

 

V221 Assembly Areas and Public Seating Areas

 

V221.1 General.  Assembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with V221 and V802.  Public seating areas shall provide wheelchair spaces and companion seats complying with V221, V802.1 and V802.3.

 

Advisory V221.1 General.  The term assembly area is defined in V106.5 as a passenger vessel, or portion thereof, used for the purpose of entertainment, educational or civic gatherings, or similar purposes.  Assembly areas include, but are not limited to, classrooms, passenger meeting rooms, motion picture houses, auditoria, theaters, playhouses, and dinner theaters.  Assembly areas should not be confused with the term areas of refuge (also known as assembly stations or muster stations).  Areas of refuge are typically large spaces that are separated from the effects of fire and flooding where passengers can gather in an emergency, and then if necessary be directed to an evacuation station for disembarking a vessel.  It is possible that an assembly area could be designed and constructed to also function as an area of refuge.  Section V221 also addresses public seating areas which are defined in V106.5 as an area, other than an assembly area, where fixed seats are provided for passengers, and dining or work surfaces are not provided.

 

V221.2 Wheelchair Spaces.  Wheelchair spaces complying with V221.2 shall be provided in assembly areas and public seating areas with fixed seating.

 

V221.2.1 Number.  The number of wheelchair spaces shall be provided in accordance with V221.2.1.

 

V221.2.1.1 Assembly Areas.  Wheelchair spaces shall be provided in each assembly area in accordance with Table V221.2.1.1.

 

V221.2.1.2 Public Seating Areas.  The number of wheelchair spaces for public seating areas shall be calculated according to the total number of fixed seats provided in public seating areas of the passenger vessel in accordance with Table V221.2.1.1.

 

Table V221.2.1.1 Number of Wheelchair Spaces

Number of Seats

Minimum Number of

Required Wheelchair Spaces

4 to 25

1

26 to 50

2

51 to 150

4

151 to 300

5

301 to 500

6

501 to 5000

6, plus 1 for each 150, or fraction thereof,

between 501 through 5000

5001 and over

36, plus 1 for each 200, or fraction thereof,

over 5000

 

V221.2.2 Integration.  Wheelchair spaces shall be an integral part of the seating plan.

 

Advisory V221.2.2 Integration.  The requirement that wheelchair spaces be an “integral part of the seating plan” means that wheelchair spaces must be placed within the footprint of the seating area.  Wheelchair spaces cannot be segregated from seating areas.  For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers in an assembly area or public seating area.

 

V221.2.3 Lines of Sight and Dispersion in Assembly Areas.  Wheelchair spaces in assembly areas shall provide lines of sight complying with V802.2 and shall comply with V221.2.3.  In providing lines of sight, wheelchair spaces shall be dispersed.  Wheelchair spaces shall provide spectators with choices of seating locations and viewing angles that are substantially equivalent to, or better than, the choices of seating locations and viewing angles available to all other spectators.  When the number of wheelchair spaces required by V221.2.1 has been met, further dispersion shall not be required. 

 

Advisory V221.2.3 Lines of Sight and Dispersion in Assembly Areas.  Consistent with the overall intent of the ADA, individuals who use wheelchairs must be provided equal access so that their experience is substantially equivalent to that of other members of the audience.  Thus, while individuals who use wheelchairs need not be provided with the best seats in the house, neither may they be relegated to the worst.

 

V221.2.3.1 Horizontal Dispersion.  Wheelchair spaces shall be dispersed horizontally.

EXCEPTIONS:  1.  Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by V221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length.  Intermediate aisles shall be included in determining the total row length.  If the row length in the 2nd and 3rd quartile of a row is insufficient to accommodate the required number of companion seats and wheelchair spaces, the additional companion seats and wheelchair spaces shall be permitted to be located in the 1st and 4th quartile of the row.

2.  In row seating, two wheelchair spaces shall be permitted to be located side-by-side.

 

Advisory V221.2.3.1 Horizontal Dispersion.  Horizontal dispersion of wheelchair spaces is the placement of spaces in an assembly facility seating area from side-to-side.

 

V221.2.3.2 Vertical Dispersion.  Wheelchair spaces shall be dispersed vertically at varying distances from the screen, or performance area.  In addition, wheelchair spaces shall be located in each balcony or mezzanine that is located on an onboard accessible route.

EXCEPTIONS:  1.  Vertical dispersion shall not be required in assembly areas with 300 or fewer seats if the wheelchair spaces provide viewing angles that are equivalent to, or better than, the average viewing angle provided in the facility.

2.  In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating.

 

Advisory V221.2.3.2 Vertical Dispersion.  When wheelchair spaces are dispersed vertically in an assembly facility they are placed at different locations within the seating area from front-to-back so that the distance from the screen, stage, area of sports activity, or other focal point is varied among wheelchair spaces.

 

Advisory V221.2.3.2 Vertical Dispersion Exception 2.  Points of entry to bleacher seating may include, but are not limited to, cross aisles, and entrance ramps and stairs.  Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points.

 

V221.2.4 Dispersion in Public Seating Areas.  Wheelchair spaces in public seating areas shall be dispersed throughout the public seating areas that are located on levels of the passenger vessel that are on the decks complying with V201.4.  When the number of wheelchair spaces required by V221.2.1 has been met, further dispersion shall not be required.

 

V221.3 Companion Seats.  At least one companion seat complying with V802.3 shall be provided for each wheelchair space required by V221.2.1.

 

V221.4 Designated Aisle Seats in Assembly Areas.  In assembly areas, at least 5 percent of the total number of aisle seats provided shall comply with V802.4 and shall be the aisle seats located closest to onboard accessible routes.

 

Advisory V221.4 Designated Aisle Seats in Assembly Areas.  When selecting which aisle seats will meet the requirements of V802.4, those aisle seats which are closest to, not necessarily on, accessible routes must be selected first.  For example, an assembly area has two aisles (A and B) serving seating areas with an accessible route connecting to the top and bottom of Aisle A only.  The aisle seats chosen to meet V802.4 must be those at the top and bottom of Aisle A, working toward the middle.  Only when all seats on Aisle A would not meet the five percent minimum would seats on Aisle B be designated.

 

 

V222 Dressing, Fitting, and Locker Rooms

 

V222.1 General.  Where dressing rooms, fitting rooms, or locker rooms are provided, at least 5 percent, but no fewer than one, of each type of use in each cluster provided shall comply with V803.

EXCEPTION:  In alterations, where it is technically infeasible to provide rooms in accordance with V222.1, one room for each sex on each level shall comply with V803.  Where only unisex rooms are provided, unisex rooms shall be permitted.

 

V222.2 Coat Hooks and Shelves.  Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with V803.5.  Where coat hooks or shelves are provided in individual compartments at least one of each type complying with V803.5 shall be provided in individual compartments in dressing, fitting, or locker rooms required to comply with V222.1.

 

 

V223 Medical Care Facilities

 

V223.1 General.  Where patient sleeping rooms are provided in medical care facilities, at least 10 percent, but no fewer than one, of the patient sleeping rooms shall comply with V805.

EXCEPTION:  Toilet rooms that are part of critical or intensive care patient sleeping rooms shall not be required to comply with V603.

 

V223.1.1 Alterations.  Where sleeping rooms are altered or added, the requirements of V223 shall apply only to the sleeping rooms being altered or added until the number of sleeping rooms complies with the minimum number required for new construction.

 

 

V224 Passenger Guest Rooms

 

V224.1 General.  Passenger vessels shall provide guest rooms in accordance with V224.

 

V224.1.1 Alterations.  Where guest rooms are altered or added, the requirements of V224 shall apply only to the guest rooms being altered or added until the number of guest rooms complies with the minimum number required for new construction.

 

Advisory V224.1.1 Alterations.  In alterations and additions, the minimum required number of accessible passenger guest rooms is based on the total number of guest rooms altered or added instead of the total number of guest rooms provided in a passenger vessel.  Typically, each alteration of a passenger vessel is limited to a particular portion of the passenger vessel.  When accessible guest rooms are added as a result of subsequent alterations, compliance with V224.5 (Dispersion) is more likely to be achieved if all of the accessible guest rooms are not provided in the same area of the passenger vessel.

 

V224.2 Guest Rooms with Mobility Features.  Guest rooms with mobility features complying with V806.2 shall be provided in accordance with Table V224.2.

 

Table V224.2 Guest Rooms with Mobility Features

Total Number of Guest Rooms Provided

Minimum Required Number of Rooms With Tubs or Showers

Minimum Number of Required Rooms With Roll-In Showers

Total Number of Required Rooms

1 to 25

1

0

1

26 to 50

2

0

2

51 to 75

3

1

4

76 to 100

4

1

5

101 to 150

5

2

7

151 to 200

6

2

8

201 to 300

7

3

10

301 to 400

8

4

12

401 to 500

9

4

13

501 to 1000

2 percent of total

1 percent of total

3 percent of total

1001 and over

20, plus 1 for each 100, or fraction thereof, over 1000

10, plus 1 for each 100, or fraction thereof, over 1000

30, plus 2 for each 100, or fraction thereof, over 1000

 

V224.3 Beds.  In guest rooms having more than 25 beds, 5 percent minimum of the beds shall have clear deck space complying with V806.2.3.

 

V224.4 Communication Features.  Guest rooms with communication features complying with V806.3 shall be provided in accordance with Table V224.4.

 

Table V224.4 Guest Rooms with Communication Features

Total Number of

Guest Rooms Provided

Minimum Number of Required Guest

Rooms with Communication Features

2 to 25

2

26 to 50

4

51 to 75

7

76 to 100

9

101 to 150

12

151 to 200

14

201 to 300

17

301 to 400

20

401 to 500

22

501 to 1000

5 percent of total

1001 and over

50, plus 3 for each 100 over 1000

 

V224.5 Dispersion.  Guest rooms required to provide mobility features complying with V806.2 and guest rooms required to provide communication features complying with V806.3 shall be dispersed among the various classes of guest rooms, and shall provide choices of types of guest rooms, number of beds, and other amenities comparable to the choices provided to other guests.  Where the minimum number of guest rooms required to comply with V806 is not sufficient to allow for complete dispersion, guest rooms shall be dispersed in the following priority: guest room type, number of beds, and amenities.  At least one guest room required to provide mobility features complying with V806.2 shall also provide communication features complying with V806.3.  Not more than 10 percent of guest rooms required to provide mobility features complying with V806.2 shall be used to satisfy the minimum number of guest rooms required to provide communication features complying with V806.3.

 

Advisory V224.5 Dispersion.  Factors to be considered in providing an equivalent range of options may include, but are not limited to, room size, bed size, cost, view, bathroom fixtures such as hot tubs and spas, smoking and nonsmoking, and the number of rooms provided.

 

V224.6 Location.  Guest rooms required to comply with V806.2 shall be provided on the decks complying with V201.4.

 

 

V225 Storage

 

V225.1 General.  Storage facilities shall comply with V225.

 

V225.2 Storage.  Where storage is provided in spaces required to comply with this document, at least one of each type shall comply with V807.

 

Advisory V225.2 Storage.  Types of storage include, but are not limited to, closets, cabinets, shelves, clothes rods, hooks, and drawers.  Where provided, at least one of each type of storage must be within the reach ranges specified in V308; however, it is permissible to install additional storage outside the reach ranges.

 

V225.2.1 Lockers.  Where lockers are provided, at least 5 percent, but no fewer than one, of each type, shall comply with V807.

 

V225.2.2 Self-Service Shelving.  Self-service shelves shall be located on an onboard accessible route complying with V402.  Self-service shelving shall not be required to comply with V308. 

 

Advisory V225.2.2 Self-Service Shelving.  Self-service shelves include, but are not limited to, library, store, or cafeteria shelves. 

 

 

V226 Dining Surfaces and Work Surfaces

 

V226.1 General.  Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with V902.  In addition, where work surfaces are provided for use by other than employees, at least 5 percent shall comply with V902.

EXCEPTIONS:  1.  Sales counters and service counters shall not be required to comply with V902.

2.  Check writing surfaces provided at check-out aisles not required to comply with V904.3 shall not be required to comply with V902.

 

V226.2 Dispersion.  Dining surfaces and work surfaces required to comply with V902 shall be dispersed throughout the space or facility containing dining surfaces and work surfaces.

 

 

V227 Sales and Service

 

V227.1 General.  Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with V227 and V904.

 

V227.2 Check-Out Aisles.  Where check-out aisles are provided, check-out aisles complying with V904.3 shall be provided in accordance with Table V227.2.  Where check-out aisles serve different functions, check-out aisles complying with V904.3 shall be provided in accordance with Table V227.2 for each function.  Where check-out aisles are dispersed throughout the passenger vessel or facility, check-out aisles complying with V904.3 shall be dispersed.

EXCEPTION:  Where the selling space is under 5000 square feet (465 m2) no more than one check-out aisle complying with V904.3 shall be required.

 

Table V227.2 Accessible Check-Out Aisles

Number of Check-Out Aisles of Each Function

Minimum Number of Check-Out Aisles of Each Function Required to Comply with V904.3

1 to 4

1

5 to 8

2

9 to 15

3

16 and over

3, plus 20 percent of additional aisles

 

V227.2.1 Altered Check-Out Aisles.  Where check-out aisles are altered, at least one of each check-out aisle serving each function shall comply with V904.3 until the number of check-out aisles complies with V227.2.

 

V227.3 Counters.  Where provided, at least one of each type of sales counter and service counter shall comply with V904.4.  Where counters are dispersed throughout the facility, counters complying with V904.4 also shall be dispersed.

 

Advisory V227.3 Counters.  Types of counters that provide different services in the same facility include, but are not limited to, order, pick-up, express, and returns.  One continuous counter can be used to provide different types of service.  For example, order and pick-up are different services.  It would not be acceptable to provide access only to the part of the counter where orders are taken when orders are picked-up at a different location on the same counter.  Both the order and pick-up section of the counter must be accessible.

 

V227.4 Food Service Lines.  Food service lines shall comply with V904.5.  Where self-service shelves are provided, at least 50 percent, but no fewer than one, of each type provided shall comply with V308.

 

V227.5 Queues and Waiting Lines.  Queues and waiting lines servicing counters or check-out aisles required to comply with V904.3 or V904.4 shall comply with V403.

 

 

V228 Depositories, Vending Machines, Change Machines, and Mail Boxes

 

V228.1 General.  Where provided, at least one of each type of depository, vending machine, and change machine shall comply with V309.

 

V228.2 Mail Boxes.  Where mail boxes are provided in an interior location, at least 5 percent, but no fewer than one, of each type shall comply with V309.

 

 

V229 Windows

 

V229.1 General.  Where glazed openings are provided in rooms or spaces required to comply with this document for operation by passengers, at least one opening shall comply with V309.  Each glazed opening required by an administrative authority to be operable shall comply with V309.

EXCEPTION:  Glazed openings in guest rooms required to provide communication features shall not be required to comply with V229.

 

 

V230 Exercise Machines and Equipment

 

V230.1 General.  At least one of each type of exercise machine and equipment shall comply with V1002.

 

Advisory V230.1 General.  Most strength training equipment and machines are considered different types.  Where operators provide a biceps curl machine and cable-cross-over machine, both machines are required to meet the provisions in section V230.1, even though an individual may be able to work on their biceps through both types of equipment.

 

Similarly, there are many types of cardiovascular exercise machines, such as stationary bicycles, rowing machines, stair climbers, and treadmills.  Each machine provides a cardiovascular exercise and is considered a different type for purposes of these requirements.

 

 

V231 Miniature Golf Facilities

 

V231.1 General.  Miniature golf facilities shall comply with V231.

 

V231.2 Minimum Number.  At least 50 percent of holes on miniature golf courses shall comply with V1003.3.

 

Advisory V231.2 Minimum Number.  Where possible, providing access to all holes on a miniature golf course is recommended.  If a course is designed with the minimum 50 percent accessible holes, designers or operators are encouraged to select holes which provide for an equivalent experience to the maximum extent possible.

 

V231.3 Miniature Golf Course Configuration.  Miniature golf courses shall be configured so that the holes complying with V1003.3 are consecutive.  Miniature golf courses shall provide an onboard accessible route from the last hole complying with V1003.3 to the course entrance or exit without requiring travel through any other holes on the course.

EXCEPTION:  One break in the sequence of consecutive holes shall be permitted provided that the last hole on the miniature golf course is the last hole in the sequence.

 

Advisory V231.3 Miniature Golf Course Configuration.  Where only the minimum 50 percent of the holes are accessible, an accessible route from the last accessible hole to the course exit or entrance must not require travel back through other holes.  In some cases, this may require an additional accessible route.  Other options include increasing the number of accessible holes in a way that limits the distance needed to connect the last accessible hole with the course exit or entrance. 

 

 

V232 Play Areas

 

V232.1 General.  Play areas for children ages 2 and over shall comply with V232.  Where separate play areas are provided within a site for specific age groups, each play area shall comply with V232.

EXCEPTIONS:  1.  In existing play areas, where play components are relocated for the purposes of creating safe use zones and the ground surface is not altered or extended for more than one use zone, the play area shall not be required to comply with V232.

2.  Where play components are altered and the ground surface is not altered, the ground surface shall not be required to comply with V1004.2.6 unless required by V202.4.

 

V232.2 Play Components.  Where provided, play components shall comply with V232.2 and V1004.

 

V232.2.1 Ground Level Play Components.  Ground level play components shall be provided in the number and types required by V232.2.1.  Ground level play components that are provided to comply with V232.2.1.1 shall be permitted to satisfy the additional number required by V232.2.1.2 if the minimum required types of play components are satisfied.  Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components.

 

V232.2.1.1 Minimum Number and Types.  Where ground level play components are provided, at least one of each type shall be on an onboard accessible route and shall comply with V1004.4.

 

V232.2.1.2 Additional Number and Types.  Where elevated play components are provided, ground level play components shall be provided in accordance with Table V232.2.1.2 and shall comply with V1004.4.

EXCEPTION:  If at least 50 percent of the elevated play components are connected by a ramp and at least 3 of the elevated play components connected by the ramp are different types of play components, the play area shall not be required to comply with V232.2.1.2.

 

Table V232.2.1.2

Number and Types of Ground Level Play Components

Required to be on an Onboard Accessible Route

 

Number of Elevated Play Components Provided

Minimum Number of Ground Level Play Components Required to be on an Onboard Accessible Route

Minimum Number of Different Types of Ground Level Play Components Required to be on an Onboard Accessible Route

1

Not applicable

Not applicable

2 to 4

1

1

5 to 7

2

2

8 to 10

3

3

11 to 13

4

3

14 to 16

5

3

17 to 19

6

3

20 to 22

7

4

23 to 25

8

4

26 and over

8, plus 1 for each additional 3, or fraction thereof, over 25

5

 

V232.2.2 Elevated Play Components.  Where elevated play components are provided, at least 50 percent shall be on an onboard accessible route and shall comply with V1004.4.

 

 

V233 Saunas and Steam Rooms. 

 

V233.1 General.  Where provided, saunas and steam rooms shall comply with V612.

EXCEPTION:  Where saunas or steam rooms are clustered at a single location, no more than 5 percent of the saunas and steam rooms, but no fewer than one, of each type in each cluster shall be required to comply with V612.

 

 

V234 Swimming Pools, Wading Pools, and Spas

 

V234.1 General.  Swimming pools, wading pools, and spas shall comply with V234.

 

V234.2 Swimming Pools.  At least one accessible means of entry shall be provided for swimming pools.  The accessible means of entry shall be a swimming pool lift complying with V1005.2 or a sloped entry complying with V1005.3.

EXCEPTIONS:  1.  Catch pools shall not be required to provide an accessible means of entry provided that the catch pool edge is on an onboard accessible route.

2.  Where swimming pools are provided in a cluster and at least one of each type of pool in the cluster uses a swimming pool lift complying with V1005.2 or a sloped entry complying with V1005.3, the other pools in the cluster shall be permitted to provide transfer walls complying with V1005.4; transfer systems complying with V1005.5; or pool stairs complying with V1005.6 as the accessible means of entry. 

 

V234.3 Wading Pools.  At least one accessible means of entry shall be provided for wading pools.  Accessible means of entry shall comply with sloped entries complying with V1005.3 or transfer systems complying with V1005.5.

 

V234.4 Spas.  At least one accessible means of entry shall be provided for spas.  Accessible means of entry shall comply with swimming pool lifts complying with V1005.2; transfer walls complying with V1005.4; or transfer systems complying with V1005.5.

EXCEPTION:  Where spas are provided in a cluster, no more than 5 percent, but no fewer than one, spa in each cluster shall be required to comply with V234.4.

 

 

V235 Shooting Facilities

 

V235.1 General.  Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with V1006.